2100 Simulator

SKU: G2100
Weight: 5.00 lb
Dimensions: 3.75″ W x 9.00″ H
Power Cord: USA/Japan (110v)

Discontinued

Order now: The new replacement Model 12V500 Duplex Alcohol Simulator.800.329.0883

Description

ALCOHOL BREATH TEST SIMULATOR
Digital Readout – Microprocessor Controlled

The Guth Model 2100 was designed using a microcontroller, eliminating broad range mercury-in-glass thermostats. All components are chrome plated or stainless steel within the wet chamber area of the instrument. The all metal top housing is chrome plated brass, preventing rust and corrosion and provides for uniform head space heating and mechanical security for all fasteners. The simulator utilizes a graduated laboratory glass container. The simulator has external fuse protection. The circuit boards have plug-in connectors. A Calibration Port is provided for verifying the temperature of the simulator. RS-232, 9600 Baud Digital Serial Output of temperature and instrument status (polled) when used in conjunction with bench top breath alcohol testers.

NHTSA APPROVED

RS-232, 9600 Baud Digital Serial output of temperature and instrument status (polled)

IDLE MODE SHUTDOWN – Heater and motor turned off, idle mode displayed, controlled via RS-232 port

About This Product

ALCOHOL BREATH TEST SIMULATOR Digital Readout - Microprocessor Controlled

A Calibration Port is provided for verifying the temperature of the simulator.

FEATURES

Delivery tube heated for ethanol temperature stability
Eight bit microprocessor control
High stability internal voltage reference
12 bit digital accuracy from A/D converter
Internal AC power transformer with AC connections isolated
Visual indication of system operation during warm-up (dot scan)
Visual indication of heater activitiy via dot display
Visual indication of system malfunction (Malfunction is displayed as an error number)
Audible alarm indication of malfunction
RFI protected

SYSTEM SHUTDOWN UNDER THE FOLLOWING CONDITIONS

No solution in container
Motor stops
No output from shorted or open temperature sensor
No change in solution temperature after initial 15 min. start-up
Temperature of solution 34.2

General Specs

Construction	Nickel Plated Brass w/ Matte Finish
Readout	Bright LED Display
Sensor	Electronic Solid State
Power Input	120 VAC, 60 cycle 220 - 240 VAC, 50 cycle
Power Consumption	72 Watts
Warranty	1 Year Parts + Labor

Size (h x w x d)	9 x 3.75 x 5 in
Weight	5 lb (1.634 kg)
Inlet Tube	3/4 in
Outlet Tube	3/4 in w/ Metal Female Sure Lock Connector

Electrical Specs

Domestic Power Input	105/120 VAC @ 50 Hz
Foreign Power Input:	220-240 VAC @ 60 Hz
External Safety Fuse	Easy, accessible plug in 1.0 AMP Fuse
Power Switch	Double pole mounted in top housing
Indicator Power Lamp	n/a
Indicator Heat Lamp	n/a
Temperature Controller	Microcontroller
Immersion Heater	Ground wire welded to heater housing for shock protection

Performance

Temperature Range	34.0°C ± .05°C
Recovery Time
Laboratory Glass Container	500ml +/- 5% FIll mark molded into glass container
Secondary Baffle	Available
Heated Head Space	n/a
Heated Output Exhaust	n/a
Warm Up Time