34C Simulator

SKU: G34C
Weight: 4.00 lb
Dimensions: 4.50″ W x10.00″ H

The Guth Model 34C Simulator is approved by the National Highway Traffic Safety Administration (NHTSA) and published on their Conforming Products List (CPL).

Discontinued

Order now: The new replacement Model 12V500 Duplex Alcohol Simulator.

Description

The Guth MModel 34C Simulator is approved by the National Highway Traffic Safety Administration (NHTSA) and published on their Conforming Products List (CPL). Simulator has a completely adjustable solid state temperature controller eliminating broad range mercury-in-glass thermostats. Components within the wet chamber area of the simulator are rust resistant, chrome plated, or stainless steel. The all metal non-magnetic top housing is nickel plated brass with a matte finish, preventing rust and corrosion. This provides for uniform headspace heating and outstanding mechanical security for all fasteners.

About This Product

The Model 34C has a double pole power switch to eliminate shock hazard, plug-in replaceable long life neon power and heater indicator lamps. An external plug-in fuse is provided offering convenient replacement. When the sensing probe is either shorted or open, the immersion heater will be disabled. A safety ground wire is welded to this heater housing to prevent electrical shock hazard in the event an internal electrical malfunction occurs. The heater will also turn off automatically if solution is absent from the wet chamber area. The heating element will turn off when the simulator is subjected to a RF field of 10 volts/meter or greater. The simulator is provided with a high precision serialized mercury-in-glass National Institute of Standards and Technology (NIST) reference thermometer to monitor temperature of the solution. Recovery time - less than 10.0 seconds

No grommets in test chamber

MECHANICAL

Container Seal: O ring neoprene

ELECTRICAL

Temperature Controller:	Solid State
Heater Shutoff Protection:	No solution in container Shorted or open sensor. RF fields of 10 volts/meter or greater.
Printed Circuit Board:	Gold plated plug-in edge board connector

TEMPERATURE MONITOR NIST Mercury-in-Glass serialized reference thermometer

SURE-LOK

General Specs

Construction	Nickel Plated Brass w/ Matte Finish
Readout	Bright LED Display
Sensor	Electronic Solid State
Power Input	Domestic: 105/130 VAC @ 60 Hz
Power Consumption	70 Watts - external fused @ 1.0 amp (plug-in)
Warranty	1 Year Parts + Labor

Size (h x w x d)	10 x 4.5 x 4.5 in (254 x 114.3 x 114.3 mm)
Weight	4.0 lbs - (1.816 kg))
Inlet Tube	3/4 in (19.05 mm)
Outlet Tube	33/4 in (19.05 mm)

Sample Description

Electrical Specs

Domestic Power Input	105/120 VAC @ 50 Hz
Foreign Power Input:
External Safety Fuse	Easy, accessible plug in 1.0 AMP Fuse
Power Switch	Double pole mounted in top housing
Indicator Power Lamp	Neon
Indicator Heat Lamp	Neon
Temperature Controller	Serialized Mercury-in-Glass Thermostat
Immersion Heater	Safety ground wire welded to heater housing for shock protection

Performance

Temperature Range	34.0°C ± .05°C
Recovery Time	Recovery time - less than 10.0 seconds
Laboratory Glass Container	500ml +/- 5% FIll mark molded into glass container
Secondary Baffle	Provided
Heated Head Space	yes
Heated Output Exhaust	yes
Warm Up Time	less than 10 minutes